The first step in designing a kitchen set is 'describes a' concept kitchen what you want, such as:
- Is the kitchen you want will be plenty of places to store your kitchen utensils 'possible' numbers.
- Is there also will be used as a dining table or a place to eat 'Breakfast' you.
- Are you the type who loves to cook.
- Is only appliance you need.
- And so forth.
This is coupled with the consideration of space conditions, such as:
- How to lay-out of the room is the kitchen of the rooms around.
- What types of interior finishing that dominate your home.
- Is the lighting and air circulation in the kitchen was enough.
- Where is it located windows and doors on the lay-out kitchen space.
- Where is the window facing.
- What is the sewer nearby.
- What is the nearest clean water outlet.
- With the next appliance you want, whether electrical power is enough to flood it in the kitchen.
- Is there a story buildings around your house.
- And so forth.
Taking into account the factors mentioned above combined with the existing budget factor in your estimate, we can begin to make a sketch of your kitchen you want to do:
- Make a kitchen appliance that you have now and what you want in the future, ranging from the size, until the characteristics of the appliance (how the openings, how to operate, would require electric power, if necessary maintenance processes / refill of these appliances how the process).
- Does the consideration of aesthetics and budget allows room to put the sink in the corner of the intersection plan kitchen set.
- Do you want a sink with double bowl and or 'wings' long.
- Remodeling must embrace the principle that there are 3 locations in the kitchen area that should be the area of cooking / cooking, washing area / sink, and storage area / storage materials are ideally cooked in the triangle is connected to one another, with enough distance to move traffic and the ease of reaching them.
- Are there desired future front loading washing machine in the kitchen area.
- Are the items to be placed in the kitchen area requires many types of tray / drawer.
- Is the circulation of air in the kitchen area to be assisted by the exhaust fan / filtrack, etc..
If the sketch plan of the kitchen is already made, then we set:
- Model kitchen design we want (minimalist, country, etc).
- Finishing the desired kitchen cabinets (MELAMIC, duco, fancy sealer, etc).
- Counter top material that we want (granite, marble, solid timber, tacon, etc).
- Models, materials, and size of sinks that we wish to install.
- Model and the size of a stove that we wish to install.
- Type of faucet / tap water that we wish to install (model counter top / faucet wall / with shower / etc).
- The size of the room clean, which at least we measure from 2 different elevation measurements (point to metakan slope of each part of the kitchen walls).
- Height of the bottom of the window frame on the kitchen floor.
- Height of the clean room at the distance measured from floor to ceiling.
- Where we will put the appliance outlet to which we choose.
- The standard height for the lower kitchen cabinets are:
- - 90 cm to international standards
- - 85 cm for standard Indonesia / Asia
- Distance between the top of the cupboard under (Cupboard) with the bottom of the closet (over head Cupboard) is between 55 to 60 cm.
- High standards of over-head is 90 cm Cupboard.
- Width of the spoon (already fabricated) that we choose (this is related to the design width of the drawer where he is).
after we finished sketches, so now we leave it to the manufacturer for us to translate the sketch design drawings more accurate.
Remember: for a typical room, like appliances, and user habits, there is no kitchen to be exact, so the kitchen in your house will very typikal once, only in accordance with your landlord.